enfr

Scanner options

Updated: 2017-08-21

Scanner options

DoxCycle options contain additional settings for scanning documents:

  1. To open Options from the Start screen, click Options in the green bar on the left side. If you have a file open, go to File menu, then click Options.
  2. On the left side of the dialog box, expand the DoxCycle section, and click on Scanner.
  3. Each option contains a description of when changing the option might be useful.
  4. Click OK or Apply to save your changes.

DoxCycle scanner options

Scan multi-page and double-sided (duplex) documents

doxcycle-double-sidedAs along as your scanner supports scanning double-sided documents (duplex), DoxCycle does too. It can treat any double-sided documents as multi-page.

Place the document in the scanner, the click Multi-page or other on the Home tab select one of the double-sided options to tell DoxCycle to capture the data on both sides of the paper.

If you just have a single-sided multi-page document, choose one of the single-sided options.

If all of your documents (slips and everything else) are always printed double-sided, you can tell DoxCycle to scan every document as double-sided. This means whatever document type you select (slips, donation receipts, etc.), DoxCycle will consider it double-sided. To change this option:

  1. If you have a file open, go to File menu, then click Options. To open this dialog box from the Start screen, click Options in the green bar on the left side of the window.
  2. On the left side of the screen, click on  Scanner.
  3. Check the Enable Duplexing scanning option.

If you are using a Fujisu ScanSnap scanner, you will need to modify the settings in the ScanSnap Manager to allow duplexing.